Good Abrasion Resistance Hollow Glass Zoolite Molecular Sieve Adsorbent
Product Introduction of Molecular Sieve Adsorbent:
Lvneng's molecular sieves have the advantages of faster adsorption speed, more regeneration times, higher crushing strength, stronger anti-pollution ability, greater utilization efficiency, and longer service life. It is the preferred desiccant for deep drying, refining and polymerization of gas and liquid phases in the petroleum and chemical industry.
1) Soak in water (or grind soak), stir, measure PH value.
2) Then pour the transparent leaching solution into the edible alkali (Na2CO3) solution to see if there is precipitation.
3) Do a heating test.
4) Use 3A molecular sieve analyzer to do a suction test.
5) Test 10% relative humidity with an automatic adsorption instrument.
Technical Parameters of Molecular Sieve Adsorbent:
| Specification |
| | Unit | Value |
| Bead Size | mm | 0.5-1.0 | 1.0-1.5 | 1.5-2.0 |
| Bulk Density | g/ml ≥ | 0.72-0.82 | 0.70-0.80 | 0.68-0.78 |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 19.0-21.5 | 19.0-21.5 | 19.0-21.5 |
| Equilibrium Nitrogen Capacity | mg/g ≤ | 2.0 | 2.0 | 2.0 |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | 1800 |
| Crush Strength | Point Contact | N ≥ | - | 10-20 | 30-50 |
| Variable Coefficient | - | 0.3 | 0.3 | 0.3 |
| Dust(Turbidity Meter) | ppm ≤ | 30 | 30 | 30 |
| Delt (10g/10ml H2O) | ℃ ≥ | 40 | 40 | 40 |
| Dew Point | ℃ ≤ | -73 | -73 | -73 |
| Loss of Ignition(950℃) | wt% ≤ | 2 | 2 | 2 |
| Size Qualification | % ≥ | 96 | 96 | 96 |
| Package Moisture | wt% ≤ | 1.5 | 1.5 | 1.5 |
| The interval value of the indexes above are based on the grades of Insulated Glass Drier |
Product Exhibition of Molecular Sieve Adsorbent:
FAQ of Molecular Sieve Adsorbent:
1. Q: Could we send a free sample for reference?
A: Yes, of course. Don't hesitate. Go ahead & ask for a sample.
2. Q: What about the price and MOQ?
A: We promise the price is better competitive with good quality. we accept both large and small quantity orders.
3. Q: What is the lead time?
A: Within 20 days after the receipt of payment or L/C.
4. Q: Payment term?
A: 30% T/T in advance, 70% T/T balance before shipment.
5. Q: How to solve the quality problems after sales?
A: Take photos of the problems and send us. After confirmation, we will provide solutions within 3 days.
For more information please call us. It's our pleasure to serve you.
The attention of Molecular Sieve Adsorbent:
1. The product cannot be exposed to the open air and should be stored in dry condition with an air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
Product Tags:
|
|
Good Abrasion Resistance Hollow Glass Zeolite Molecular Sieve Adsorbent Images
|
